 |
No items matching your keywords were found.
|
No items matching your keywords were found.
Co2 Laser Cutting Equipment
|
No items matching your keywords were found.
|
No items matching your keywords were found.
|
No items matching your keywords were found.
|
No items matching your keywords were found.
| | The Co2 Laser $88.86 No Synopsis Available |
| | Beretta 92FS Laser, Fits CO2 Pistol $31.19 Laser Fits Beretta 92FS CO2 pistol Mounts on accessory rail under barrel |
| | CO2 Controller Model 2002B: HY $189 CO2 Controller Model # 2002B by Control Wizard. This unit was manufactured to connect to the Control Wizard CO2 Monitor Model # 2002A. This unit is designed to turn CO2 equipment ON and OFF at preset levels by computing the Monitors signal output. Simply plug in your CO2 equipment in the outlet provided. Then, plug one of its power cords into a wall outlet and the other cord into a controlled power outlet (like you would find on any brand of atmospheric controller) that powers your exhaust fans. When the exhaust fans are powered the Controller will automatically turn your CO2 equipment OFF. This saves CO2 from being vented while the area is being cooled. When the exhaust fans shut OFF the CO2 equipment is allowed to fill the room to your pre-set levels. |
| | CO2 Monitor Model 2002A: HY $322 Carbon Dioxide Monitor by Control Wizard. 0-5000 PPM Range. 20 volt AC transformer. LCD display. Infrared sensor is very accurate. Adjustable silent flashing alarm. May be used in conjunction with the Control Wizard CO2 Controller to automatically turn CO2 systems ON and OFF a pre-set level. Turns CO2 ON at 150 ppm below set-point and OFF at 150 PPM above set-point. Truely a great value. CO2 Controller Model # 2002B by Control Wizard. This unit, listed separately (sku HY_CO351), was manufactured to connect to this unit, the Control Wizard CO2 Monitor Model # 2002A. The controller unit is designed to turn CO2 equipment ON and OFF at preset levels by computing the Monitors signal output. Simply plug in your CO2 equipment in the outlet provided. Then, plug one of its power cords into a wall outlet and the other cord into a controlled power outlet (like you would find on any brand of atmospheric controller) that powers your exhaust fans. When the exhaust fans are powered the Controller will automatically turn your CO2 equipment OFF. This saves CO2 from being vented while the area is being cooled. When the exhaust fans shut OFF the CO2 equipment is allowed to fill the room to your pre-set levels. |
| | CO2 Monitor and Controller Kit: HY $511 CO2 Monitor # 2002A & Controller Model 2002B by Control Wizard. These two units work together to give outstanding results. They can be purchased seperately, see product number HY_CO350 and HY_CO351. This combo has been designed to turn CO2 equipment ON and OFF at preset levels by reading the Monitors signal output. Simply plug in your CO2 equipment in the outlet provided. Then, plug one of its power cords into a wall outlet and the other cord into a controlled power outlet (like you would find on any brand of atmospheric controller or timer) that powers your exhaust fans. When the exhaust fans are powered the Controller will automatically turn your CO2 equipment OFF. This saves CO2 from being vented while the area is being cooled. When the exhaust fans shut OFF the CO2 equipment is allowed to fill the room to your pre-set levels. The Monitor reads from 0-5000 PPM CO2. Preset levels are adjusted within the monitor. The comfort or working zone is 300 PPM. 150 PPM below and 150 PPM above your preset level. 1500 PPM is generally regarded to be the optimum preset level. |
| | Walther CP99 CO2 Gun + Laser $233.99 8-Shot Semi-Auto |
| | CO2 Brass Check Valve $34.99 These are the highest quality industrial-grade Brass Check Valve from German Air Pressure Systems. They are heavy-duty enough for food-grade liquid as well. Just like you, we also thought that these were unnecessarily overkill for aquaristic purposes, but it has been proven that these are the ONLY qualified Check Valves for protecting your expensive CO2 equipment (Regulator & Cylinders) from saltwater with a pressurized Kalkreaktor pushing it backward vigorously. Takes 4/6 mm (ID/OD) or 1/8" airline tubing. |
| | Digital Innovations CO2 Air Buster $10.99 30103 Pure anti-static CO2 gas delivers higher velocity airflow than canned air Compact housing with easy to replace 16 gram air cartridges Completely environmentally safe (no CFCs, HFCs) and nonflammable Patented actuator variably controls airflow for the right amount of cleaning pressure Oil-free for use on delicate items such as photographic negatives and electronic equipment Air Duster CO2 Air Buster Digital Innovations Digital Innovations, LLC Electronic Equipment Photographic Negative www.digitalinnovations.com |
| | Excellofizz: 15 CO2 tablets: HY $63.78 Excellofizz is economical for small to medium size greenhouses. Requires no expensive dispensing or monitoring equipment, and can be used effectively once every other day. That is, 15 tablets is a thirty-day supply. This product is used to increase the amount of CO2 in small growing areas without the use of bottle tanks. Excellofiz emits the proper CO2 levels for indoor plants by reacting and giving off pure CO2 gas and also absorbing oxygen from the air. Simply place one of the Excellofiz pucks into the container provided. Pour 2-1/2 ounces of water into the container and leave the lid open slightly. Excellofiz will then slowly react emitting the proper amount of CO2 gas for approximately 8 hours into the photoperiod. Excellofiz will then continue to increase CO2 levels after the reaction has completely subsided by absorbing oxygen from the air. Excellofizz pucks are now 20% larger and last 3 hours longer total of 8 hours, and will now treat up to a 10 x 12 room. Now with eucalyptus. This refreshing and uplifting fragrance is sure to enhance your growing pleasure and will cover unwanted odors. Eucalyptus also kills airborne bacteria and dispels mites. Each puck when reacted will emit enough CO2 gas in a 10' x 12' area to raise the level by approximately 1600ppm. This will give a total of 1900-2200ppm for optimum growth. Excellofizz will greatly increase plant mass and fruit load. Excellofizz releases CO2 into your greenhouse or grow room atmosphere allowing leafy plant tissue to quickly and easily absorb carbon. Plants are made up of two basic components: water and carbon. Carbon is the building block for all plants. Excellofizz is safe to use around people and pets and will not raise the CO2 to dangerous levels. Excellofizz will not add heat or moisture to your greenhouse. In fact it will remove some heat and moisture. Excellofizz contains pure natural environmentally friendly ingredients that can be safely disposed of. |
| | Excellofizz: 50 CO2 tablets: HY $190.34 Excellofizz is economical for small to medium size greenhouses. Requires no expensive dispensing or monitoring equipment, and can be used effectively once every other day. That is, 15 tablets is a thirty-day supply. This product is used to increase the amount of CO2 in small growing areas without the use of bottle tanks. Excellofiz emits the proper CO2 levels for indoor plants by reacting and giving off pure CO2 gas and also absorbing oxygen from the air. Simply place one of the Excellofiz pucks into the container provided. Pour 2-1/2 ounces of water into the container and leave the lid open slightly. Excellofiz will then slowly react emitting the proper amount of CO2 gas for approximately 8 hours into the photoperiod. Excellofiz will then continue to increase CO2 levels after the reaction has completely subsided by absorbing oxygen from the air. Excellofizz pucks are now 20% larger and last 3 hours longer total of 8 hours, and will now treat up to a 10 x 12 room. Now with eucalyptus. This refreshing and uplifting fragrance is sure to enhance your growing pleasure and will cover unwanted odors. Eucalyptus also kills airborne bacteria and dispels mites. Each puck when reacted will emit enough CO2 gas in a 10' x 12' area to raise the level by approximately 1600ppm. This will give a total of 1900-2200ppm for optimum growth. Excellofizz will greatly increase plant mass and fruit load. Excellofizz releases CO2 into your greenhouse or grow room atmosphere allowing leafy plant tissue to quickly and easily absorb carbon. Plants are made up of two basic components: water and carbon. Carbon is the building block for all plants. Excellofizz is safe to use around people and pets and will not raise the CO2 to dangerous levels. Excellofizz will not add heat or moisture to your greenhouse. In fact it will remove some heat and moisture. Excellofizz contains pure natural environmentally friendly ingredients that can be safely disposed of. |
| | Walther CP99 Compact & Laser $115.14 18-Shot CO2 BB Repeater with Blowback! |
| | Kronus 4 Temp Humidity Co2 : J $339.95 The Kronus 4 controls temperature, humidity and CO2 in your grow area at your preferred settings. This is the ultimate indoor garden controller. It accelerates your plants potential by creating the perfect growing environment. Give your plants the care they deserve, garden with Titan Controls! The Kronus 4 controls temperature, humidity and CO2 in you grow area at your preferred settings. The built in ten (10) minute 'CO2 delay' feature deactivates CO2 equipment if day temperature or humidity setting is exceeded by using a digitally based control system. The software polls the temperature and humidity setting ten (10) minutes after the CO2 outlet is defeated to verify that the temperature or humidity is too high, and then activates your exhaust fan or A/C to lower the conditions under your settings. If the temperature drops below the set point during the ten (10) minute 'CO2 delay', then the exhaust or A/C process is defeated and the 'CO2 ON' outlet is reactivated saving your valuable CO2 and keeping it amongst the plants where it belongs. The 'Night Only' and 'Night Heat' outputs provide a nightlight or exhaust fan and heat for your enclosure during the nighttime period. This provides the customer with total temperature and humidity control in their garden. The Kronus 4 activates an exhaust fan or A/C or if the temperature or humidity exceeds the preferred settings. The 'CO2 ON' feature is only activated during daylight periods to dose CO2 when your plants are able to uptake it and is disabled during the nighttime hours or when the humidity or temperature exceeds the preferred settings. Plug your exhaust fan or A/C into the 'Exhaust Fan Output' and plug your CO2 tank with emitter system or CO2 generator into the 'CO2 Output' and your daytime conditions are under control. For nighttime conditions, you can plug a nightlight into the 'Night Only Output' so you can work in your garden after hours. The 'Night Heat Output' is used to plug a heater into to keep your plants from getting the night chills. The Kronus 4 gives the expert gardener the top shelf controller they're looking for to maintain their garden! Controls CO2, temperature and humidity in your garden. Activates ''CO2 ON' outlet only during daylight hours. Ten (10) minute 'CO2 delay' feature allows maximum CO2 coverage with minimum CO2 waste. Features a 'Night Only' and 'Night Heat' outputs to assist the gardener with the maintenance of the garden after the lights have turned off. Easy to understand and simple to use. Highlighted 'Grow Zones' for ease of use. 25 foot modular remote temperature and humidity sensor. (10 & 50 foot cables available) Only the highest quality components are used. Improves your yield by creating the perfect environment for your plants. Controllers designed by our industry, for our industry. 15 Amps/120 Volts/60 Hz. 3 year warranty. Manufacturer’s Instructions are online here: http://www.titancontrols.net/media/2701/kronus4_ins |
| | Woodmarvels.com: Laser Cutting Plans $21.93 No Synopsis Available |
| | Red Sea Fish Pharm Ltd. Red Sea Co2 Bubble Counter $25.77 Compact bubble counter with integrated check valve, provides an accurate measurement of gas flow rates. Built in CO2 ressistant check valve protects equipment from back-siphoning. |
| | CO2 Cartridges $10.94 CO2 Cartridges Mosquito Magnet CO2 Cartridges |
| | Daisy Powerline 5503 CO2 BB Gun Combo $155.99 Gun, Laser, Dot Sight & More! Blowback |
| Account limit of 3981 requests per hour exceeded. |
fastrack CO2 laser cutting machine (Leather Cutting Sample)
Laser Cutting: The Fundamentals
When we imagine lasers, we may conjure up something seen in the movies. Lasers, however, are a part of our everyday world, making cutting and processing objects much simpler in industry. In laser material processing, a laser will make contact with a target and alterations to that object will happen, such as through the soaking up of photons, which are particles of light given off from the laser. These particles will be changed into heat energy.
How Lasers Actually Work
Lasers are the instruments that control how highly stimulated atoms emit photons to create a stream of light. There are only three things that can happen when a laser connects with a material. The laser light stream will either be reflected, sent, or it will be absorbed into the object. Sometimes two or three of these occurrences, such as transmission and absorption, may occur simultaneously. The beam will be one wavelength and one color as well as compact and concentrated, not like beams of light normally found in everyday life. If the majority of the beam is absorbed into an object, which is commonly the case in laser material processing, the main traits that have to be taken into account are the average power the laser light has, its intensity on the subject it hits, and its wavelength. Intensity on a basic level is the brightness of the laser beam. The wavelength is the series of waves the photons create. Think of a moving water wave, the particles of light are fluctuating in the same type of wave. The average strength of a laser beam is measured in watts (W). Lasers all contain an active medium that takes in energy. The medium can be made of either a solid crystal-like material, liquid, gas (such as in a CO2 laser), or a diode, and contains the atoms absorbing the energy. A laser also has to have a way to make the atoms become excited. This could be a light source, for example.
The optical resonator is a set of mirrors that are found inside the laser system. One of the functions of a laser is to pump up the atoms to get them in an excited state. This is done by pumping up what is referred to as a lasing medium inside the laser. At each extreme of the lasing medium is a mirror. light particles reflect off of both of the mirrors and energize other electrons to discharge even more photons. The mirror at one extreme lets some light escape, which is the laser beam. Getting the atoms excited takes getting their corresponding electrons at a advanced level of energy. The excited electrons that first absorbed energy to get excited can now emit energy as light energy, or a flow of photons.
Classifications
Lasers are rated according to the traits of average power, wavelength, and intensity. This implies they are either solid-state, liquid, gas, or semi conductor lasers. Solid-state are lasers with substance that is optically clear and the active medium is solid. Liquid, or dye lasers have a environment that is liquid and they can operate with pulsing or continuous wavelengths. Gaseous lasers have an environment of gas. Examples of gas lasers are carbon dioxide lasers and neon signs found in shop displays. And the fourth category is semi conductor or diode lasers that are the most common type of laser.
Laser Cutting
Using CO2 lasers as an illustration, carbon dioxide atoms in gaseous form become energized at a low pressure between two mirrors. One of the two reflective mirrors lets some of the beam leak through. They produce a large amount of heat. The light output is found in the infrared spectrum at the end. Having a beam of high quality is paramount, especially in cutting. Lasers cut via the beam of light produced by the laser. The beam starts by melting what is in its path or sometimes vaporizing the material. Slicing happens when the beam has cut through the subject. There are different types of lasers designed to slice various types of materials. CO2 lasers have high capacities for absorption, and are often used in the cutting of a plethora of materials such as metals, plastics, and wood. CO2 lasers have other materials in them besides carbon dioxide; they have a mixture of gases including helium (He) and nitrogen (N2). Nitrogen will slice up to ½ inch thick stainless steel in addition to aluminum. Oxygen is able to slice carbon steel. Laser cutting pros include no ill effects on machines, are faster than using other options for cutting, and can cut through thicker materials.
Lasers have applications from communications in data storage to the medical field. They have revolutionized surgery and cutting in industry. It is exciting to see what is in store for cutting applications with lasers in the future.
About the Author
Marc Anderes is the Vice President of Operations of Maloya Laser which specializes in Metal Manufacturing and Laser Cutting with advanced laser technologies, servicing aerospace, scientific, transportation, medical and machinery needs.
