Engraving Milling An old pot/ possibly medieval shallow sink or something along those lines, Does anyone know what it is?
There is also a symbol engraved into the pot, what does it stand for or what is the company name. It was found near an old medieval corn mill in scarcroft/leeds. Below are links to the photo's
It might be a old sink from St. Andrews Golf Club or from Prestwick Old Course Hotel. The OCH might stand for Old Course Hotel.
For working on extremely hard materials: steel cast steel nonferrous metals plastics. Vibrationfree milling of high accuracy dimensions. Ideal for technical work engraving or milling circuitboards. Shanks Diameter 7/64 or Diameter 3/32 . Note: Please make sure to clamp work piece securely when milling. 1 Pieces. Size: 5/128 .
For working on extremely hard materials: steel cast steel nonferrous metals plastics. Vibrationfree milling of high accuracy dimensions. Ideal for technical work engraving or milling circuitboards. Shanks Diameter 7/64 or Diameter 3/32 . Note: Please make sure to clamp work piece securely when milling. 1 Pieces. Size: 3/32 .
MICROMOTaccessories for rotary tools. Milling bits (all measurements in inch). Tungsten carbide milling bits. Made of highcompressed wearresistant tungsten carbide for optimum lifetime. Used for vibrationfree milling of high accuracy dimensions. For technical work on extremely hard materials: chromecobalt alloy steel nonferrous metals plastics. May be used for detail carving engraving and routing in wood fiberglass plastic and nonferrous metals as well as for engraving and milling of circuit boards. It is advisable to secure workpieces well avoiding accidents. Shanks 7/64 and 3/32 .
Milling cutter Titanium nitride-coated for extended life For use with Ilco key cutting machines model No. KD50A, KD50C, and KD71A, 3.15 diameter, .197 thick, .63 hole Brand #: Kaba Ilco Corp. CU50A UPC: 036448035656 Keywords: cutting machine part milling cutter
Kitchen Utensils Milling is lightweight, lovely design, convenient and practical using in daily life home setting. The Kitchen Utensils Milling is lovely appearance that makes it much more beautiful.
Takes the guess work out of milling for swing safety conversions. Cuts machine time in half by breaking down milling cuts into three easy steps. Holds 98 or '03 bolt shrouds square and secure. Clear easy-to-read instructions included. Mfg: Glen Chapman SPECS: Machined aluminum. 4" (10.2cm) lg 3" (7.6cm) w 1" (2.5cm) thick.
Takes the guess work out of milling for swing safety conversions. Cuts machine time in half by breaking down milling cuts into three easy steps. Holds 98 or '03 bolt shrouds square and secure. Clear, easy-to-read instructions included. SPECS: Machined aluminum. 4" (10.2cm) lg, 3" (7.6cm) w, 1" (2.5cm) thick.
Equips your present lathe for milling, cutting keyways and slots, milling external and internal dovetails, squaring shafts, making dies, molds, flats, squares, hexagons, octagons; sawing, grinding and drilling at any angle. Almost unlimited uses in the gun shop, and greatly increases the versatility and usability of your lathe (besides saving you the cost of buying a mill!). Quickly installs by removing the tool post ring around "U"-shaped base angle bracket. The Milling Attachment straddles the tool post and is bolted down just like an ordinary tool holder. Swivels and rotates completely to hold work at any angle. Vise locks onto work and is raised or lowered by control SPECS: Comes with combination cross - "V" and flat blocks on vise. Available in 3 sizes to fit most popular lathes equipped with rocker-type tool post holders.
Equips your present lathe for milling, cutting keyways and slots, milling external and internal dovetails, squaring shafts, making dies, molds, flats, squares, hexagons, octagons; sawing, grinding and drilling at any angle. Almost unlimited uses in the gun shop, and greatly increases the versatility and usability of your lathe (besides saving you the cost of buying a mill!). Quickly installs by removing the tool post ring around "U"-shaped base angle bracket. The Milling Attachment straddles the tool post and is bolted down just like an ordinary tool holder. Swivels and rotates completely to hold work at any angle. Vise locks onto work and is raised or lowered by control SPECS: Comes with combination cross - "V" and flat blocks on vise. Available in 3 sizes to fit most popular lathes equipped with rocker-type tool post holders.
Precision stable work-holder for all engraving. The fully adjustable pivot drag with radial and thrust needle bearings that use the entire mass of the block to absorb any shock and force. Heat-treated blued jaws and two adapter plates (one fixed and one pivot) to take standard engraving block attachments. The ball and crown are hard chrome plated. Furnished with rubber holding ring and attachments. Mfg: Grs SPECS: Steel. Weighs 28½ lbs. (12.9kg) Spherical diameter 5¾" (14.6cm) height 7¼" (18.4cm). Jaws - 3" (7.6cm) wide 1¾" (4.4cm) high 3½" (9cm) opening.
Engraving cutter Ideal for engraving, carving, routing in wood, fibre, plastic and soft materials - everything except hardened materials All have 3/32 shanks Brand #: Dremel 105 UPC: 080596001056 Keywords: dremel accessory engraving bit moto tool engrave cutter
Account limit of 3981 requests per hour exceeded.
CNC engraving mill
those tungston carbide (sp?) and titanium mens wedding bands?
ok, i have heard that the tungston carbide ones have to be cut off if they ever get stuck on a man's finger, so presumably you cant engrave them, right? can you engrave them? what about titanium ones? would they have to be cut off and can you engrave them? my fiance works in a steel mill so obviously his ring will take a beating (no he doesnt wear it while working, but taking it off and throwing it in lockers etc, it gets beaten) so i dont want to get white gold. if tungston and titanium are not able to be engraved, can someone tell me about a knockoff or some other harder metal ring that CAN be engraved? no gold, white gold, silver, or platinum please. thanks! thanks so far! what about a metal thats not AS hard as tungsten or titanium (they sound like a pain to get engraved so far!), and not as soft as gold, but will still look nice and be engraveable?
I think tungsten carbide rings can be engraved. It is done by a laser. (Tungsten carbide can be scratched by diamonds. Also, most people don't know the technology is not new. It has been around for a very long time. )
A very good version of tungsten carbide's market cost is around $4.00 an ounce or around $65 a pound. That version contains boron which makes it even stronger.
"If your ring has existing engraving, we will also re-engrave for no additional fee (unless it is not our standard engraving) for a shipping handling fee of $25.00."
http://www.tungstenpride.com/
"Engraved Tungsten rings will be charged a refurbishing fee of $40.00 if you wish to return or exchange the ring."
"Do you engrave tungsten rings? A. YES, We offer laser engraving. The fee is $50.00. Engrave up to 25 characters. Please note that engraved rings are non-returnable, non-refundable. For this reason, we recommend you purchase the ring first to ensure proper fit and satisfaction, then you may send it to us for engraving. Because Tungsten Carbide is one of the world's hardest metals, special machinery is required to engrave on it. Not only must the machine be able to penetrate the metal, but it must do it in a way that isn't so deep as to harm the integrity of the ring. Please note: because engraving is permanent and creates a heirloom, we cannot accept returns on engraved items. "http://www.joyjewelers.com/faqs/tungsten_rings_faq.php
