Cnc Super

is this good ? for learner coz im looking for a road bike that will last long plssss help?

cell blade
Specifications
FrameSuper stiff Aero 7005 alloy frame with replaceable dropout.
ForkCarbon fork.
Stem3D CNC Alloy stem, ZOOM.
Handle Baralloy over size bar.
Head SetVP integrated head set
Gear SetShimano Sora group set.
Front DerailleurShimano Sora.
Rear DerailleurShimano Sora.
ShiftersShimano Sora STI Dual Control Lever.
SprocketsShimano ,Sora 9 speed
CrankShimano Sora FC-3301-A double, 39-52 teeth
BB SetShimano Sora OCTALINK fully sealed BB set.
ChainShimano CN-HG-53 chain
BrakesShimano Sora brakes, front and rear.
RimsALEX DC19 alloy double wall wheels
HubsQundo quick release hubs
SpokesStainless steel with black coating.
Tires700Cx23
PedalWellgo alloy pedals with clips.
Seat Post27.2x300mm micro adjustable
SaddleCIONLL Comfort sports seat.
Size50cm, 54cm, 57cm, 60cm, 62cm
Weightapproximately 9.3kg.

$900

I actually think the Trek 1.2 listed below would be a better bike with the price tag at $879. One reason are the wheels. IMO the Bontrager are better rims than the Alex and I have both and the Bontrager are a better ride. As far as the Sora Groupo, It's not a bad group. I have and run it on one of my trikes and have since 1998 and I have never had a problem with it, its been great. So if your going to upgrade or go for something better don't bother with the Tiagra go to at least the 105s the gains between the Sora and Tiagra are minimal at best and that upgrade would be a waste of money. Also with the Trek you'll be getting a FSA ( Full Speed Ahead) crank not Sora and a Sram cassette which is better than the Sora , those I would consider to an upgrade on its own.

Frameset
Sizes 50, 52, 54, 56, 58, 60, 62cm
Frame Alpha White Aluminum
Fork Bontrager Approved, carbon
Wheels
Wheels Alloy hubs; Bontrager Approved alloy rims
Tires Bontrager Race AW, 700x23c (43cm: 650x23c)
Drivetrain
Shifters Shimano Sora STI, 9 speed
Front Derailleur Shimano Sora
Rear Derailleur Shimano Sora
Crank FSA Vero 50/34 or 50/39/30
Cassette SRAM PG-950 11-26, 9 speed
Pedals Nylon body w/alloy cage
Components
Saddle Bontrager R1
Seat Post Bontrager Alloy, infinite tilt adjustment
Handlebars Bontrager SSR VR, 31.8mm
Stem Bontrager SSR, 10 degree, 31.8mm
Headset Aheadset Slimstak w/semi-cartridge bearings, sealed
Brakeset Alloy dual pivot w/Shimano Sora STI levers

Edelbrock Super Victor CNC BBC Intake Manifold $825.99 For 3500 to 8000 RPM High-Performance Engines,Developed for Competition High RPM and Large CID,CNC Machined by Reher-Morrison Racing Engines,Critical Areas Machined for Out of Box Convenience,Accepts Standard Length Distributors,Use Appropriate 4500 Series Carburetor

Edelbrock Super Victor CNC Intake Manifold $723.99 For 3500 to 8000 RPM High-Performance Engines,Extended Constant Cross-Section of Runners,Great Mid-Range Torque For Short Track Power,Improved Throttle Response for 60-foot Times,Direct Line of Sight Flow Path Maximizes Flow,CNC Machined in Critical Areas for Performance,Designed for 23 degree Standard Port Heads,Runners Have a 2.80 square in. Cross Section

CNC TURNFIN $4.5 CNC TURNFIN

CNC 3-Blade Set(CNC Grips & Swash Plate) $85 CNC 3-Blade Set(CNC Grips & Swash Plate)

CNC 3-Blade Set(CNC Grips & Swash Plate) $85 CNC 3-Blade Set(CNC Grips & Swash Plate)

CNC STRUT SET 6mm/7.5mm $16.5 CNC STRUT SET 6mm/7.5mm

CNC RUNDER-ASSEMBLY 75mm $16.5 CNC RUNDER-ASSEMBLY 75mm

CNC WATER COOLED T-MANIFOLD26CC $31.5 CNC WATER COOLED T-MANIFOLD26CC

CNC Metal Swashplate $13 CNC Metal Swashplate

CNC Metal Tail Unit $18 CNC Metal Tail Unit

CNC Metal Washout Base $12 CNC Metal Washout Base

CNC See-Saw Set $18 CNC See-Saw Set

CNC See-Saw Spindle $5 CNC See-Saw Spindle

CNC Stop Plate(for 3-Blade) $6 CNC Stop Plate(for 3-Blade)

Account limit of 3876 requests per hour exceeded.

cnc super stock hemi pistons

Machining centers, CNC lathes, rotary tables, mini mills, super mini mills. What r these?

I am applying for a job that sells these. It is just an administrative position, but I am trying to learn something about the company.

Lathes: Cut in in the horizontal plane
Milling Machine: Cuts in the vertical plane
CNC lathe: This is a lathe controlled by a computer. Generally someone, usually a designer will "program" a design to cut. This "program" is created in a special piece of software that is compatible with the machine and is essentially just a set of coordinates in a format the machine can understand. Then this program is fed to the machine by the operator. The CNC late will then proceed to cut the design by following the "program" by itself. At this point the only reason the operator would get involved is to stop the machine if there is a problem of some kind.
There is also a CNC Mill (often called a CNC machine) that is similar except that it cuts from the vertical plane rather than horizontal like a lathe. It also had a huge bed which allows the machine to cut the full length of the object automatically.

Rotary table: This is used with a milling machine (looks like a drill press on steroids). It allows the object being cut to be rotated 360 deg on the vertical (z) axis so that all sides are accessible without having to remove it, rotate, and reset each time. That is...if this is the kind I'm thinking of.

Mini mills and super mini mills: Smaller versions of a standard milling machine and are capable of cutting smaller objects with greater precision.

Pictures are worth 1000 words, so here's some links with photos of the different machines
Machining center: http://www.vertical-machining-center-1.com/
CNC Lathe: http://www.cnc-lathe-1.com/cnc-lathe.htm
Rotary Table: http://rotary-table.taiwanbelts.com/
Mini Mill/Super Mini: http://www.mini-lathe.com/Mini_mill/Main/mini-mill.htm