Carbide Cnc

CNC milling tool for machining bonded sand?

I need a tool enough hard to machine a sand material that is chemically bonded. Carbides are not enough hard. I cannot use coolant.

This is a bit of a toughie.

I would say use a harder grade of carbide - and/or a micrograin type.

If you don't know mutch about carbide tools, then now is as good a time to learn. There are many different grades. Carbide tools use tungsten carbide embedded in a cobalt matrix which hold all the particles together. The ratios are varied - to give either harder tips - that are likely to shatter, or tougher tips - which are more likely to blunt.

If you are cutting an abrasive material, Then pick a tool with replacable industry standard tips, Run your speeds about half what is recommended, and up your feedrate to about 75% of what you would normally use. Use a larger tool if possible - then finish with a fine.

Use compressed air or mist system foor cooling the tool.

If it's overheating - just slow down everything.

If you know anything about CNC's - you will know that there is the manufacturers "optimim" feeds and speeds, and then there is those that actually work, due to workholding/ rigidity issues and the playoff of productivity vs tool life.

Carbide tools are also available coated with Titanium nitride or tungsten nitride, or can be bonded onto HSCO tool shanks for flexibility - and thus higher feed rates (I've actually used 6mm bonded end mills that bend about 15 degrees during high feedrates - and look impossible!)

Good luck with that.
(who decided bonded sand ? - what's the advantage there?)

CNC TURNFIN $4.5 CNC TURNFIN

CNC 3-Blade Set(CNC Grips & Swash Plate) $85 CNC 3-Blade Set(CNC Grips & Swash Plate)

CNC 3-Blade Set(CNC Grips & Swash Plate) $85 CNC 3-Blade Set(CNC Grips & Swash Plate)

Carbide And Sorrell $6.93 Carbide And Sorrell

CNC STRUT SET 6mm/7.5mm $16.5 CNC STRUT SET 6mm/7.5mm

CNC RUNDER-ASSEMBLY 75mm $16.5 CNC RUNDER-ASSEMBLY 75mm

CNC WATER COOLED T-MANIFOLD26CC $31.5 CNC WATER COOLED T-MANIFOLD26CC

CNC Metal Swashplate $13 CNC Metal Swashplate

CNC Metal Tail Unit $18 CNC Metal Tail Unit

CNC Metal Washout Base $12 CNC Metal Washout Base

CNC See-Saw Set $18 CNC See-Saw Set

CNC See-Saw Spindle $5 CNC See-Saw Spindle

CNC Stop Plate(for 3-Blade) $6 CNC Stop Plate(for 3-Blade)

CNC Swashplate Assembly $25 CNC Swashplate Assembly

CNC Swashplate Guide $12 CNC Swashplate Guide

DataFlute CNC Carbide #01

What is the best way to sell my products outside India?

I manufacture Solid carbide tools & CNC machine tool accessories in India. How to capture market outside India? What is the best way? Please guide.

I would have to say a website. With a website, you can grab the attention of possible customers all around the world. One word of advice; I have had many friends in India, who run websites. The problem is, since English is not the native language of the country, the content of their website is usually not the easiest to read. If you are not a native English speaker, have your website content written by a native English speaker. Assuming your two biggest markets out of India will be United States & Canada, it is important to have a website that is easy to navigate and understand. Good luck!